PUMA MX3100

Product code: S000052
Manufacturer : Doosan
Place to sell : N/A

Rating : 0 notes

제품개요

Process integrated multi-tasking turning center
By integrating turning center and machining center, all machining process done in single chucking set up. 
Equipped with a milling spindle and an ATC, equivalent to those for the machining center 
5-axis contouring of B-axis in 0.001 degree control (Optional feature)

제원


PUMA MX3100: Standard model

Description PUMA MX3100
Capacity Max. Turning Diameter Φ760mm
Max. Turning Length 1,540mm
Bar Working Diameter Φ102mm
Main Spindle Spindle Speed 3,000 r/min
Milling Spindle Milling Spindle Speed 12,000 r/min
Carriage Travel Distance X-axis 630 mm
Z-axis 1,585mm
Y-axis 230mm
C1-axis 360(0.001) deg
A-axis 1,550mm
B-axis 240deg
Rapid Traverse X-axis 36m/min
Z-axis 36m/min
Y-axis 26m/mm
A-axis 7m/mm
C1-axis 400r/min
B-axis 42m/min
Max. Cutting Feedrate X-axis 500mm/rev
Z-axis 500mm/rev
Y-axis 500mm/rev
C1-axis 4,800deg/min
Turret Number of Mounted Tools 40

PUMA MX3100S: Twin spindle-mounted model

Description PUMA MX3100S
Capacity Max. Turning Diameter Φ760mm
Max. Turning Length 1,540mm
Bar Working Diameter Φ1002mm
Main Spindle (left and right) Spindle Speed 4,000 r/min
Milling Spindle Milling Spindle Speed 12,000 r/min
Carriage Travel Distance X-axis 630 mm
Z-axis 1,580mm
Y-axis 230mm
A-axis 1,550mm
C1-axis 360(0.001) deg
C2-axis 360(0.001) deg
B-axis 240deg
Rapid Traverse X-axis 36m/min
Z-axis 36m/min
Y-axis 26m/mm
A-axis 30m/min
C1-axis 400r/min
C2-axis 400r/min
B-axis 42m/min
Max. Cutting Feedrate X-axis 500mm/rev
Z-axis 500mm/rev
Y-axis 500mm/rev
A-axis 500mm/rev
C1-axis 4,800deg/min
C2-axis 4,800deg/min
Turret Number of Mounted Tools 40

Optional Features

  • Air gun
  • Automatic door with safety device
  • Automatic measuring system (in process touch probe)
  • Automatic power off
  • Bar feeder interface
  • Bar puller
  • Chip conveyor
  • Chip bucket
  • Coolant blower
  • Dual chucking pressure
  • Hardened and ground jaws
  • Linear scale (X1/X2/Y/Z1-axis)
  • Minimum quantity lubrication (MQL)
  • Oil skimmer
  • Oil mist collector
  • Pressure switch for chucking pressure check
  • Parts unloader and conveyor
  • Servo driven steady rest (none Lower turret)
  • Signal tower (yellow, red, green)
  • Special chucks
  • Through the spindle coolant (Left or Right spindle)
  • Tool monitoring system
  • Tool pre-setter (Auto type-renishaw mode)

Back to top

 

Products in this Category