Từ khóa

LYNX 300 series

Hãng sản xuất : Doosan
Địa điểm bán : N/A

Đánh giá : 0 điểm

 
Description
 
Unit
 
Lynx 300
 
Lynx 300M
 Capacity  Swing over bed  mm (inch)  651 (25.6)
 Swing over saddle  mm (inch)  461 (18.1)
 Recom. Turning diameter  mm (inch)  254 (10.0)
 Max. Turning diameter  mm (inch)  450 (17.7)  370 (14.6)
 Max. Turning length  mm (inch)  765 (30.1)  712 (28.0)
 Chuck size  inch  10
 Bar working diameter  mm (inch)  76 (3.0)
 Travels  Travel distance  X-axis  mm (inch) 255 (10.0)
 Z-axis
 mm
(inch)
 790 (31.1)
 Feedrates  Rapid Traverse  Rate  X-axis  m/min (ipm)  24 (945)
 Z-axis  m/min (ipm)  30 (1181)
 
 
 Spindle
 Max. Spindle speed  r/min  3500
 Main spindle motor power  kW (Hp)
15 / 11 {18.5 / 15} <15min. / cont.>
(20 / 15 {25 / 20})
 Max. Spindle Torque for 
N·m
(lbf ft)
191 {235.4 / 327.4 / 403.3}
( 141 {174 / 241 / 297} )
 Spindle nose  ASA  A2-8
 Spindle bearing diameter  (Front)  mm (inch) 120 (4.7)
 Spindle through hole diameter  mm (inch)  86 (3.4)
 Min. spindle Indexing angle
 (C-axis)
 deg  -  0.001
 
 
 
 
 Turret
 No. of tool stations  ea  
12
 OD tool size  mm (inch)  25 (1.0)
 Max. boring bar size  mm (inch)  40 (1.6)
 Turret Indexing time
 (1 station swivel)
 s  0.15
 Max. Rotary tool speed  r/min  -  5000
 Rotary tool motor power  kW (Hp)
-
 5.5 (7.5)
 Tailstock  Tailstock travel  mm (inch)  775 (30.5)
 Quill diameter  mm (inch)  80 (3.1)
 Quill travel mm (inch)  120 (4.7)
 Quill bore taper  MT  MT#4
 Power  source  Electric power supply
(rated capacity)
 kVA  30.50  32.62
 Machine Dimensions  Length
 mm (inch)
 2993 (117.8)
 Width  mm (inch)  1785 (70.3)
 Height  mm (inch)  1715 (67.5)
 Weight  kg (lb)  4000 (8800)  4050 (8910)
 CNC  NC system    DOOSAN-FANUC i



   ● Standard ◦ Optional

 
 No.
 
 Description
 
 Features
 
 Lynx 300
 
 Lynx 300M
 1  Chuck  10 inch
 2  No chuck  ○  ○
 3  Jaw  Soft jaw  ●  ●
 4  Hard jaw  ○  ○
 5  Chucking Option  DUAL PRESSURE CHUCKING  ○  ○
 6  CHUCK CLAMP CONFIRMATION  ○  ○
 7  Steady rest  Hydraulic (Ø4 ~ Ø165)  ○  ○
 8  V stand  V STAND FOR SHAFT WORKPIECE  ○  ○
 9  Tailstock  Mannual  ●  ●
 10  Programmable  ○  ○
 11  Coolant
Pump
 1.5 bar  ●  ●
 
12
 Increase Power
(4.5/7/10/14.5 bar)
 ○  ○
 
13
Coolant options  Chuck coolant  ○  ○
 
14
 Coolant chiller  ○  ○
 
15
 Oil skimmer  ○  ○
 16  Coolant pressure switch
 17  Coolant level switch
 18  Coolant gun
 19  
Chip disposal options
 Side type chip conveyor  
 
 20  Rear type chip conveyor
 21  Chip bucket
 22  Air blower
 
23
 Mist collector  ○  ○
 24  
 
 
 
Measuring & automation
 Tool setter (manual/automatic)  ○  ○
 25  Part catcher with parts box  ○  ○
 26  Part catcher with parts conveyor  ○  ○
 27  Auto door  ○  ○
 28  Bar feeder interface  ○  ○
 29  Robot interface  ○  ○
 30  
 Others
 Tool load monitoring system  ○  ○
 31  Linear scale  ○  ○
 32  Signal tower  ○  ○
 33  Air gun  ○  ○
 34  Automatic power off  ○  ○

Sản phẩm cùng loại

 

HOTLINE

       
       
 Mr   Nam 01693 080 198 Phó phòng kỹ thuật thanhnam@cybertechvn.com
 Mr   Cường 0977 604 859 Nhân viên kỹ thuât vancuong@cybertechvn.com