Từ khóa

PUMA TT1800 Series

Hãng sản xuất : Doosan
Địa điểm bán : N/A

Đánh giá : 0 điểm

제품개요

Highly productive turning center equipped with two opposing spindles and twin turrets
Multi processes and mass production enabled by lower and upper turrets, Y-axis, and left and right hand spindles
Z-axis rapid traverse of 40 m/min
Factory automation enabled by barfeeder, part unloader, gantry loader, etc (Optional features)

제원


PUMA TT1800MS: Axis milling-mounted model

Description PUMA TT1800MS
Capacity Maximum Distance Between Spindle Ends 980mm
Maximum Turning Diameter Upper Turret Φ230mm
Lower Turret Φ230mm
Max. Turning Length(from each spindle) 230mm
Bar Working Diameter Φ67mm
Main Spindle 1 Spindle Speed 5,000 r/min
Cs spindle Index Angle 360(0.001) deg
Cs spindle Index Angle 600 r/min
Main Spindle 2 Spindle Speed 5,000 r/min
Cs spindle Index Angle 360(0.001) deg
Cs spindle Index Angle 600 r/min
Carriage Travel Distance X1-axis 165 mm
X2-axis 190 mm
Z1-axis 700mm
Z2-axis 720mm
B-axis 770mm
Rapid Traverse X1-axis 20m/min
X2-axis 20m/min
Z1-axis 40m/min
Z2-axis 40m/min
B-axis 40m/min
Turret Number of Mounted Tools Upper Turret 12
Lower Turret 12
OD Tool Size 20mm
Boring Bar Diameter Φ32mm

PUMA TT1500SY: Y-axis-mounted model

Description PUMA TT1800SY
Capacity Maximum Distance Between Spindle Ends 980mm
Maximum Turning Diameter Upper Turret Φ230mm
Lower Turret Φ230mm
Max. Turning Length(from each spindle) 230mm
Bar Working Diameter Φ67mm
Main spindle 1 Spindle Speed 5,000 r/min
Cs spindle Index Angle 360(0.001) deg
Cs spindle Index Angle 600 r/min
Main spindle 2 Spindle Speed 5,000 r/min
Cs spindle Index Angle 360(0.001) deg
Cs spindle Index Angle 600 r/min
Carriage Travel Distance X1-axis 165 mm
X2-axis 190 mm
Z1-axis 700mm
Z2-axis 720mm
B-axis 770mm
Y-axis 100 (±50)mm
Rapid Traverse X1-axis 20m/min
X2-axis 20m/min
Z1-axis 40m/min
Z2-axis 40m/min
B-axis 40m/min
Y-axis 7.5m/min
Turret Number of Mounted Tools Upper Turret 12
Lower Turret 12
OD Tool Size 20mm
Boring Bar Diameter Φ32mm

Optional Features

  • Automatic door
  • Device for automatically breaking power supply
  • Automatic measuring device (separate agreement for details)
  • Chip conveyor and bucket
  • Collet chuck
  • High pressure coolant pump
  • 3 colored signal
  • Special chuck
  • Tool monitoring system
  • Tool pre-setter (hydraulic type/manual type)
  • Air gun
  • Automatic door with safety device
  • Bar feeder interface
  • Coolant blower
  • Dual chucking pressure
  • Hardened and ground jaws
  • Minimum Quantity Lubrication (MQL)system
  • Oil skimmer
  • Parts unloader and conveyor
  • Proximity switches for chuck clamp detection
  • Pressure switch for chucking pressure check

Sản phẩm cùng loại

 

HOTLINE

       
       
 Mr   Nam 01693 080 198 Phó phòng kỹ thuật thanhnam@cybertechvn.com
 Mr   Cường 0977 604 859 Nhân viên kỹ thuât vancuong@cybertechvn.com